Vacuum Cold Trap 真空冷却阀 

真空冷却阀可保护昂贵的真空泵,无需加入液氮或干冰。

Titan Trap®
The Titan Trap is the first cold trap to incorporate a titanium helical coil design, to provide maximum efficiency for vacuum trapping of corrosive vapors to -100ºC. 
Vapor Trap

The Vapor Trap can cool to a low temperature of -90ºC with a trapping rate up to five liters per hour

Titan Trap®
Maximum efficiency for vacuum trapping of corrosive vapors to -100°C
• 十分钟内发动 
• -50°C or -100°C两种温度范围 
• Teflon®涂层,不锈钢内腔 
• 在24小时内冷凝1、3或5公升的产品 

应用: 
 密封真空泵 
 凝胶干燥 
 蒸发器 
 干燥剂 
 气体脱水 
型号规格1
  TT455 TT855 TT4105 TT8105
最底温度 °C -50 -50 -100 -100
腔体容量 (liters) 4 8 4 8
Trapping Rate (liters/24 hours) 3 5 3 5
压缩机 1/4 hp 1/3 hp Two @ 1/4 hp Two @ 1/4 hp
控制器 标准 On/Off On/Off On/Off On/Off
可选 Microprocessor Microprocessor Microprocessor Microprocessor
指示器读数(°C)  标准 1 1 1 1
可选 0.1 with MP 0.1 with MP 0.1 with MP 0.1 with MP
外形尺寸 inches 15.5 x 24 x 13 15.5 x 24 x 13 19 x 24 x 13 19 x 24 x 13
cm 39 x 61 x 33 39 x 61 x 33 48 x 61 x 33 48 x 61 x 33
重量 lbs/kg 55/25 55/25 85/39 85/39
电源2 120V/60 Hz/14A 120V/60 Hz/14A 120V/60 Hz/17A 120V/60 Hz/17A
1. Titan traps include safety-coated glass top.
2. 220V/50 Hz also available. Decreases heat removal by 17%. 

Vapor Trap
Maximum efficiency for vacuum trapping vapors to -90°C, without LN2 or dry ice.
• 十分钟内启动 
• 制冷至-50°C or -90°C 
• 每分钟真空泵调节流量至250公升 
• 在24小时内冷凝1,3或5公升的产品 

应用: 
 凝胶干燥 
 脱水器 
 干燥剂 
 真空密封泵保护
型号规格1
  VT255 VT455 VT490 VT890
最底温度 °C -50 -50 -90 -90
腔体容量 (liters) 2 4 4 8
Trapping Rate (liters/24 hours) 1 3 3 5
压缩机 1/4 hp 1/3 hp Two @ 1/4 hp Two @ 1/4 hp
控制器 On/Off On/Off On/Off On/Off
指示器读数(°C)  - 1 1 1
外形尺寸 inches 10.5 x 20.5 x 11 15.5 x 24 x 13 15.5 x 24 x 13 19 x 24 x 13
cm 26.7 x 52.1 x 27.9 39.4 x 61 x 33 39.4 x 61 x 33 48.3 x 61 x 33
重量 lbs/kg 55/25 55/25 85/39 85/39
电源2 120V/60 Hz/4A 120V/60 Hz/4A 120V/60 Hz/7A 120V/60 Hz/7A
1.Vapor traps do not include tops.
2. 220V/50 Hz also available. Decreases heat removal by 17%. 
Vapor Trap Top Plates and Liners 
Plates  
  SSVT2 Stainless steel vacuum top plate, 2L, 3/4" OD inlet, 5/8" OD outlet
  SSVT4 Stainless steel vacuum top plate, 4L, 3/4" OD inlet, 5/8" OD outlet 
  SSVT8 Stainless steel vacuum top plate, 8L, 3/4" OD inlet, 5/8" OD outlet
  TTGT2 Glass vacuum top plate (safety-coated), 2L, 1/2" OD inlet/outlet 
  TTGT4 Glass vacuum top plate (safety-coated), 4L, 1/2" OD inlet/outlet
  TTGT8 Glass vacuum top plate (safety-coated), 8L, 1/2" OD inlet/outlet
Liners  
  CRC2 Glass liner with copper mesh heat transfer jacket, titanium down tube, 2L, 1/2" OD inlet/outlet 
  CRC4 Glass liner with copper mesh heat transfer jacket, titanium down tube, 4L, 1/2" OD inlet/outlet

2002-2021 Copyright © Fantron Technologies

沪ICP备09002794号-1 工信部网站:beian.miit.gov.cn